WS2812B 5v 68 LED/m IP67 "NeoPixel" strip

  • Model: RGB5050-WS2812-68pm
  • Shipping Weight: 0.2lbs
  • 10 Units in Stock
  • Manufactured by: Insomnia Lighting

$24.00

Add to Cart:
Based on the wildly successful WS2812B chip-on-die LEDs, these LED strips have 68 magnificent 24 bit LEDs per meter. These strips are manufactured on a 12mm wide flexible PCB and are enclosed in a silicone tube for an IP67 rating. Like our 32 LED/m WS2812B strips, these are also manufactured on the thicker 12mm flex PCB for better current handling.

These strips operate on 5v and simply require a timed data signal (there is no clock line on the WS2811/WS2812 protocol). This makes operation with low power or non-realtime microntrollers harder but not impossible. There are many examples for Arduino, PIC, and even Raspberry PI.

Further data around these LEDs and LED strips can be found at:
http://www.insomnia.org/led/documentation/rgbsmdws2811.html

These LED strips come on 5M rolls, IP67 sealed in a silicone tube and glued on either end. We sell by the meter, however please note that the strips will be cut from a 5M roll and will lose this end seal. We sell the 12mm caps to re-seal these in our store, if necessary.

This product was added to our catalog on Sunday 11 September, 2016.

Who's Online

There currently are 5 guests online.
Your IP Address is: 54.162.118.107
Copyright © 2018 Insomnia Lighting. Powered by Zen Cart