WS2812 5v 32 LED/m IP67

  • Model: RGB5050-WS2812-32pm
  • Shipping Weight: 0.15lbs
  • 9 Units in Stock
  • Manufactured by: Insomnia Lighting

$10.00

Add to Cart:
Based on the wildly successful WS2812B chip-on-die LEDs, these LED strips have 32 magnificent 24 bit LEDs per meter. These strips are manufactured on a 12mm wide flexible PCB and are enclosed in a silicone tube for an IP67 rating. The 12mm PCB is thicker, but handles more current than the 10mm PCB that some of the other strips are manufactured on, making these a high quality alternative for demanding applications.

These strips operate on 5v and simply require a timed data signal (there is no clock line on the WS2811/WS2812 protocol). This makes operation with low power or non-realtime microntrollers harder but not impossible. There are many examples for Arduino, PIC, and even Raspberry PI.

Further data around these LEDs and LED strips can be found at:
http://www.insomnia.org/led/documentation/rgbsmdws2811.html

These LED strips come on 5M rolls, IP67 sealed in a silicone tube and glued on either end. We sell by the meter, however please note that the strips will be cut from a 5M roll and will lose this end seal. We sell the 12mm caps to re-seal these in our store, if necessary.

This product was added to our catalog on Sunday 11 September, 2016.

Customers who bought this product also purchased...

Who's Online

There currently is 1 guest online.
Your IP Address is: 54.221.29.4
Copyright © 2018 Insomnia Lighting. Powered by Zen Cart