WS2812B 5v 60 LED/m IP67 "NeoPixel" strip

  • Model: RGB5050-WS2812-60pm
  • Shipping Weight: 0.2lbs
  • 36 Units in Stock
  • Manufactured by: Insomnia Lighting


Add to Cart:
Based on the wildly successful WS2812B chip-on-die LEDs, these LED strips have 60 magnificent 24 bit LEDs per meter. These strips are manufactured on a 10mm wide flexible PCB and are enclosed in a silicone tube for an IP67 rating.

These strips operate on 5v and simply require a timed data signal (there is no clock line on the WS2811/WS2812 protocol). This makes operation with low power or non-realtime microntrollers harder but not impossible. There are many examples for Arduino, PIC, and even Raspberry PI.

Further data around these LEDs and LED strips can be found at:

These LED strips come on 5M rolls, IP67 sealed in a silicone tube and glued on either end. We sell by the meter, however please note that the strips will be cut from a 5M roll and will lose this end seal. We sell the 10mm caps to re-seal these in our store, if necessary.

This product was added to our catalog on Sunday 11 September, 2016.

Customers who bought this product also purchased...

Who's Online

There currently are 2 guests online.
Your IP Address is:
Copyright © 2019 Insomnia Lighting. Powered by Zen Cart